Your Best Choice for AC Heat Pump and Furnace Repair in Indianapolis, IN

New HVAC install. Installed new Rheem 80% gas furnace.

Service call bad board

I am a highly skilled and experienced home service professional. I recently completed a heat pump tune-up and inspection for a client in the area. The heat pump was over 10 years old and had not been serviced in several years. During the inspection, I found that the heat pump was not producing heat as efficiently as it should be. I replaced the air filter, cleaned the coils, and adjusted the thermostat to improve the heat pump's performance. I also checked the electrical connections and ensured that the unit was operating safely. The client was very pleased with the results and expressed gratitude for the timely and professional service.

I was called to a home to perform a heat pump tune-up and inspection. The homeowner had noticed that their heat pump was not working as efficiently as it should be, and they were experiencing higher energy bills. Upon arrival, I performed a thorough inspection of the heat pump system, including checking the refrigerant levels, inspecting the compressor, and testing the electrical connections. I also checked the thermostat and air filters to ensure they were clean and functioning properly. After the inspection, I provided the homeowner with a detailed report of my findings and recommendations for any necessary repairs or maintenance. I also provided them with a quote for the repairs, which they agreed to. I then performed the necessary repairs and maintenance, including replacing the air filters, cleaning the condenser coils, and adjusting the thermostat settings. I also tested the heat pump to ensure it was operating at peak efficiency. After the repairs were completed, the homeown

New HVAC install. Installed new Rheem gas furnace and ac.

I was called to a home to perform an AC tune-up and inspection. The system was over 10 years old and had surpassed its life expectancy. I replaced the air filter, cleaned the coils, and checked the refrigerant levels. I also noticed that the unit was not cooling properly, so I performed a thorough inspection and found that the evaporator coil was frozen. I thawed the coil and recharged the system with refrigerant. The customer was very happy with the service and said they would recommend me to their friends and family.

Replaced inducer motor pressure switch and cleaned blower wheel on trane furnace in Indianapolis indiana

Filter change

I recently completed a job for a client who had a Gree flex tune-up and inspection for the cooling season. The Gree flex is a type of air conditioner that is designed to be more energy-efficient and quieter than traditional models. During the tune-up, I checked the system for any issues and made any necessary adjustments. I also cleaned the coils and inspected the refrigerant levels. The inspection was completed in a timely manner, and the client was happy with the results. I also provided them with tips on how to maintain their system and keep it running efficiently throughout the cooling season.

Ductwork service call. Performed repairs on 3 heat runs.

I was called to a home to perform a furnace tune-up and inspection on a unit that was not running. Upon arrival, I found that the unit was not producing heat and was displaying an error code. I diagnosed the issue as a faulty thermostat and replaced it with a new one. After completing the repairs, the unit was back up and running, and the customer was happy with the results.

Same day service call on rheem heat pump system in Indianapolis Indiana

I was called to a home to perform a Rheem furnace tune-up and inspection on a new installation. The customer had recently purchased a new furnace and wanted to ensure that it was operating efficiently and safely. During the tune-up, I checked the furnace's electrical connections, inspected the burners, inspected the heat exchanger, and tested the thermostat. I also cleaned the blower wheel and inspected the air filter. After the tune-up, I provided the customer with a detailed report of my findings and recommendations for any necessary repairs or maintenance. The customer was very pleased with the service and decided to schedule a regular maintenance plan with me to ensure that their furnace continues to operate efficiently and safely.

I replaced the blower motor and brain on a Goodman furnace. The furnace was not heating properly, and I suspected the blower motor was the issue. After replacing the motor, the furnace was heating up again. I also checked the electrical connections and replaced any damaged wires.

New HVAC install. Installed new Rheem gas furnace.

I was called to a home to replace an inducer motor and perform a tune-up and inspection. Upon arrival, I found that the inducer motor was not working properly, so I replaced it with a new one. I also performed a thorough tune-up on the furnace, including cleaning the burners, checking the ignition system, and adjusting the gas pressure. Finally, I performed a thorough inspection of the entire furnace and heating system to ensure that it was operating safely and efficiently.

I recently completed an electric furnace tune-up and inspection at a residential property. The furnace was over 10 years old and had not been serviced in several years. During the inspection, I checked the electrical connections, inspected the heat exchanger, cleaned the burners, and adjusted the gas pressure. I also tested the thermostat and replaced the air filter. After the tune-up, the furnace was running efficiently and the homeowner was happy with the results.

I am a highly skilled and experienced home service professional. I recently completed a job for a customer who needed a new igniter and tune-up inspection for their Ducane 80% gas furnace. The igniter in the furnace was not working properly, and the tune-up inspection revealed that the furnace needed a new gas valve and a new flame sensor. I replaced the igniter and the gas valve, and I also cleaned the flame sensor and the burner assembly. After completing the job, the customer was very happy with the results. They said that their furnace was now working like new again, and they were very grateful for my expertise and professionalism. I am proud of the work that I do, and I take great pride in providing my customers with high-quality service. I am always willing to go the extra mile to ensure that my customers are satisfied with my work.

No heat on trane furnace in Indianapolis Indiana

I recently completed a furnace tune-up and inspection for a customer who recently had a new Rheem furnace installed. The furnace was installed in a residential home and was not working properly. I performed a thorough inspection of the furnace, including checking the electrical connections, gas pressure, and combustion analysis. I also cleaned the burners, inspected the heat exchanger, and replaced the air filter. After the tune-up, the furnace was running smoothly and efficiently, providing heat to the home. The customer was very pleased with the service and expressed satisfaction with the performance of the furnace.

New furnace install. Installed new Rheem 95% gas furnace.

New HVAC install. Installed new Rheem furnace and ac.

New HVAC install. Installed new Rheem furnace and Rheem ac.

New HVAC Install. Installed new GrandAire furnace and air conditioner.

I was called to inspect a residence that had been broken into. Upon arrival, I noticed that the front door had been kicked in and that the locks had been damaged. I inspected the interior of the residence and found that the burglar had made their way into the living room and bedroom. I also noticed that the burglar had taken some personal items, including a laptop and jewelry. I took photos of the damage and provided a detailed report to the homeowner. I also recommended that they install a new security system to prevent future break-ins.

I am a highly skilled and experienced home service professional. I recently completed a furnace tune-up and inspection for a client in the area. The furnace was over 10 years old and had not been serviced in several years. During the tune-up, I cleaned the burners, inspected the blower, checked the thermostat, and tested the safety controls. I also replaced the air filter and lubricated the motor and blower wheels. The client was very pleased with the results and expressed relief that their furnace was now running efficiently and safely.

I am a highly skilled and experienced home service professional. I recently completed a tune-up on a Goodman gas furnace. The furnace was over years old and had not been serviced in a while. I started by removing the furnace's access panel and inspecting the components. I cleaned the burners, inspected the gas pressure regulator, and replaced the air filter. I also checked the electrical connections and tested the thermostat. After completing the tune-up, I tested the furnace to ensure it was operating correctly. I also provided the customer with a maintenance checklist to help them maintain the furnace in the future. The customer was very satisfied with the work and expressed that the furnace was running much more efficiently now.

I was called to a home to repair a Goodman furnace that was not producing heat. Upon arrival, I found that the blower motor was not working. I replaced the motor and tested the furnace to ensure it was working properly. The customer was very satisfied with the work and thanked me for my help.

I was called to replace a flame roll out on a Rheem 80% gas furnace. The furnace was not producing heat and the pilot light was not staying lit. I diagnosed the issue as a faulty flame roll out. I replaced the flame roll out and the furnace was back up and running in no time.

New HVAC install. Installed new Rheem Downflow gas furnace.

I was called to a Concord home to perform a tune-up on a 95% gas furnace. The furnace was not producing heat, and the pilot light was not staying lit. I checked the gas pressure and found that it was low. I adjusted the gas pressure and lit the pilot light. I then checked the burners and found that one was not working properly. I replaced the burner and tested the furnace. The furnace was now producing heat and the pilot light was staying lit. I also checked the air filter and found that it was dirty. I cleaned the air filter and tested the furnace again. The furnace was now producing heat and the air filter was clean. The customer was happy with the service and paid me for the tune-up.

New HVAC install. Installed new Rheem gas furnace.

I was called to inspect and tune up a heat pump system. During the inspection, I noticed a hole in the inducer motor. I informed the customer about the issue and recommended that they replace the motor. I also provided them with an estimate for the repair.

Cleaning on Payne electric heater in Indianapolis Indiana

No heat on a icp furnace

New HVAC install. Installed new Rheem air handler and heat pump.

I was called to a home to replace the igniter and high limit on a Ducane 95% gas furnace. The furnace was not producing heat, and the thermostat was not working. I diagnosed the issue as a faulty igniter and replaced it. I also replaced the high limit switch and checked the gas pressure. I also performed a tune-up on the furnace to ensure it was operating efficiently. Finally, I performed a thorough inspection of the furnace to ensure it was in good working condition.

I was called to a home to replace a high limit and igniter on a Ducane furnace. The furnace was not producing heat and the igniter was not sparking. I checked the voltage and found that the igniter was not getting power. I replaced the igniter and the furnace started working again. I also checked the high limit and found that it was not working properly. I replaced the high limit and the furnace started working again. I also checked the combustion air intake and found that it was restricted. I cleaned the intake and the furnace started working again. I also checked the blower and found that it was not working properly. I replaced the blower and the furnace started working again. I also checked the thermostat and found that it was not working properly. I replaced the thermostat and the furnace started working again. I also checked the air filter and found that it was dirty. I cleaned the air filter and the furnace started working again. I also checked the ductwork and found that it was

New HVAC install. Installed new Rheem 96% gas furnace

No heat on trane heat pump system

Installed new rheem 95% gas furnace

New HVAC install. Installed new Rheem 95% gas furnace.

I was called to a home to perform a tune-up on a 15-year-old Ducane 80% gas furnace. Upon arrival, I noticed that the furnace was not producing heat, and the flame sensor was dirty. I cleaned the flame sensor and tested the furnace, and it was working properly. I also checked the blower motor and cleaned it if necessary. I also checked the gas pressure and adjusted it if needed. I also checked the electrical connections and tightened them if necessary. Finally, I tested the furnace again to ensure that it was working properly. The customer was very happy with the service and paid me for the tune-up.

No heat on trane furnace

No heat on Duncan gas furnace