Your Best Choice for AC Heat Pump and Furnace Repair in Greenwood, IN

I was called to a home in the city to perform a tune-up on two Bryant 96% gas furnaces. The furnaces were installed in the home's basement and were over 15 years old. The customer had noticed that the furnaces were not heating the home as well as they used to and that the air conditioner was not cooling the home as well as it should. Upon arrival, I performed a thorough inspection of the furnaces and identified several issues. The first issue was that the furnaces were not producing enough heat. I checked the burners, the gas pressure, and the airflow and found that the burners were dirty and needed to be cleaned. I also checked the gas pressure regulator and found that it was not working properly. I replaced the regulator and the burners and tested the furnaces again. The furnaces now produced enough heat to heat the home to the desired temperature. The second issue was that the air conditioner was not cooling the home as well as it should. I checked the air filter and found that it

Installed humidistat

No heat on rheem furnace

I was called to replace an inducer and pressure switch on a Carrier furnace. The inducer was leaking and the pressure switch was not working properly. I removed the old inducer and pressure switch and installed new ones. I also checked the electrical connections and tested the furnace to ensure it was working properly.

I recently completed a job at an HVAC contractor company where I performed a tune-up and inspection on a 2013 Rheem gas furnace. The furnace was installed in a residential home and had been experiencing some issues with its performance. During the tune-up, I checked the furnace's electrical connections, inspected the blower motor and blower wheel, cleaned the burners, inspected the gas pressure regulator, and tested the thermostat. I also checked the furnace's air filter and replaced it if necessary. After the tune-up, I performed a thorough inspection of the furnace to identify any potential issues. I checked the furnace's combustion chamber for any signs of damage or debris, and I checked the heat exchanger for any leaks or corrosion. If any issues were found during the inspection, I provided the homeowner with a detailed estimate for the repairs. I also provided them with information on how to maintain their furnace to prevent future issues. Overall, the tune-up and inspection o

I recently completed a tune-up on a 2018 Lennox complete gas furnace and AC system. This involved inspecting and adjusting the system's components to ensure optimal performance and efficiency. I also cleaned the system's air filters, checked the refrigerant levels, and tested the system's safety features. The tune-up process helped improve the system's heating and cooling capabilities, resulting in increased comfort and energy savings for the homeowner.

I recently completed a tune-up on a 2010 Payne 95% gas furnace. This furnace was in need of some maintenance and tune-up to ensure it was operating efficiently and safely. During the tune-up, I checked the furnace's electrical connections, cleaned the burners, inspected the blower motor and inspected the heat exchanger. I also adjusted the gas pressure and cleaned the air filter. After the tune-up, the furnace was running smoothly and efficiently, providing heat to the home. The homeowner was pleased with the results and thanked me for my service. Overall, this was a straightforward tune-up that helped ensure the furnace was operating at its best.

HVAC cleaning call. Performed routine maintenance on Goodman furnace.

I recently completed a job as an HVAC contractor, where I installed a new furnace and performed an inspection before the cold season. The furnace was a high-efficiency model that provided optimal heating for the home. I also checked the ductwork for any leaks or damage and made the necessary repairs. The inspection revealed that the system was operating efficiently and safely, and I provided the homeowner with a detailed report. I am proud of the work I did and look forward to completing more jobs in the future.

I recently completed a job as an HVAC contractor technician where I inspected a 2023 Carrier rooftop unit. The unit was installed in a commercial building and had been operating for several years. During the inspection, I checked the unit's electrical connections, refrigerant levels, and compressor operation. I also inspected the unit's ductwork and insulation to ensure they were properly installed and functioning. One of the most important aspects of the inspection was to check the unit's refrigerant levels. Refrigerant is a critical component of the cooling system and must be maintained at the correct level to ensure optimal performance. If the refrigerant level is too low, the unit may not be able to cool the building effectively, which can lead to increased energy consumption and potential damage to the unit. During the inspection, I found that the refrigerant level was low, which could have been caused by a leak or improper maintenance. I recommended that the building owner repl

I was called to a home to perform a Bryant furnace tune-up and inspection. The furnace was over 15 years old and had not been serviced in a while. I arrived at the home and began by inspecting the furnace for any obvious signs of damage or wear. I then cleaned the furnace's burners, inspected the blower motor, and checked the thermostat. After that, I tested the furnace's safety controls and adjusted the gas pressure. Finally, I performed a combustion analysis to ensure that the furnace was burning fuel e

I recently completed a job for a client who needed a tune-up and inspection of their Amana gas furnace. The furnace was over 10 years old and had been experiencing some issues with efficiency and reliability. During the tune-up, I checked the furnace's burners, ignition system, and safety controls. I also cleaned the burners, inspected the heat exchanger, and checked the electrical connections. After the tune-up, I performed a thorough inspection of the furnace to identify any potential problems. I checked the blower motor, air filter, and venting system. I also tested the thermostat and gas valve to ensure they were working properly. The client was very pleased with the results of the tune-up and inspection. They said the furnace was running more efficiently and reliably than it had in years. They also appreciated the thoroughness of the inspection and the attention to detail. Overall, it was a successful job that helped the client save money on their energy bills and ensure that

I was called to a home in the suburbs to service a RHEEM furnace and humidifier. The customer had noticed that the furnace was not producing heat and the humidifier was not working. Upon arrival, I inspected the furnace and found that the blower motor had failed. I replaced the motor and tested the furnace to ensure it was working properly. I also checked the humidifier and found that the water pump had failed. I replaced the pump and tested the humidifier to ensure it was working properly. After completing the repairs, I tested the furnace and humidifier to ensure they were working properly. The customer was happy with the repairs and paid me for the service. I was pleased with the outcome of the job and felt that I had done a good job. I was also happy that I was able to provide the customer with a solution to their problem.

Fall seasonal inspection on trane furnace

I was called to inspect and tune up a Rheem gas furnace in a residential home. The furnace was over 5 years old and had not been serviced in a while. I inspected the furnace and found that it was in good working condition, but needed a tune-up to ensure it would run efficiently and safely. I cleaned the burners, inspected the gas pressure, and adjusted the thermostat. I also checked the blower motor and cleaned the air filter. Finally, I tested the furnace to make sure it was heating the home properly. The homeowner was very pleased with the work and said they would call me again if they had any other issues.

I am a highly skilled HVAC contractor professional. I recently completed a furnace tune and inspection for a client in the city. The furnace was over 15 years old and had been experiencing some issues with efficiency and reliability. During the tune and inspection, I thoroughly cleaned the furnace, replaced the air filter, checked the ignition system, and tested the burners and heat exchanger. I also checked the thermostat and made any necessary adjustments to ensure that the furnace was operating at peak efficiency. After the tune and inspection, the client was very pleased with the results. The furnace was running more efficiently, and the client reported that their energy bills had decreased. I also provided the client with a maintenance plan to ensure that the furnace continued to operate at its best for years to come. Overall, the furnace tune and inspection was a successful project that helped the client save money on their energy bills and improve the efficiency of their heati

Performed seasonal heating inspection on Lennox furnace

I recently completed a 2016 Trane 95% gas furnace tune-up and inspection for a customer . The furnace was installed in 2016 During the tune-up, I performed a thorough inspection of the furnace, including checking the burners, ignition, and safety controls. I also cleaned the burners, inspected the heat exchanger, and checked the electrical connections. I also provided the customer with a detailed report of my findings and recommendations for any necessary repairs or maintenance. The customer was very pleased with the service and expressed satisfaction with the performance of the furnace.

I recently completed a job at an HVAC contractor company. The job was to perform a tune-up and inspection on a Gree heat pump. The heat pump was installed in a residential home and had been experiencing some issues with cooling. During the tune-up, I checked the refrigerant levels, cleaned the coils, and tested the electrical components. I also performed a thorough inspection of the ductwork to ensure it was properly installed and not leaking. After the tune-up, I provided the customer with a detailed report of my findings and recommendations for any further repairs or maintenance. The customer was very satisfied with the work and expressed that they would recommend our company to others. Overall, it was a successful job that helped the customer keep their heat pump running efficiently and effectively.

I recently completed a furnace tune-up and inspection at a home in Concord. The homeowner had noticed that their furnace wasn't working as efficiently as it should and was experiencing some issues with temperature control. During the tune-up, I thoroughly inspected the furnace, including the blower, heat exchanger, and combustion chamber. I cleaned the components, adjusted the settings, and tested the airflow to ensure optimal performance. I also checked the electrical connections and safety features to ensure they were working properly. After the tune-up, I provided the homeowner with a detailed report outlining the findings and recommendations for any necessary repairs or maintenance. I also offered a maintenance plan to

Rheem ac not cooling found ac dirty cleaned it and checked pressures

I recently completed an HVAC installation for a customer. The job involved replacing an old, inefficient system with a new, high-efficiency Rheem heat pump. The installation process was challenging, but the customer was pleased with the results.

New HVAC install. Installed new Rheem gas furnace.

Ductwork and seasonal furnace clean and check. Trane. 95% efficient. Variable speed blower.

I was called to a home to repair a York AC unit that had a bad motor. Upon arrival, I found that the motor was completely burned out and needed to be replaced. I removed the old motor and installed a new one, making sure to properly seal all connections and test the unit to ensure it was working properly. The customer was very pleased with the work and thanked me for my help.

I was called to a home for a struggling air conditioner. I found that the unit was struggling to cool the home due to a lack of maintenance. I performed maintenance on the unit, including cleaning the coils and replacing the filter. After completing the maintenance, the unit was able to cool the home effectively.

I was called to a home in the Center Grove/Greenwood area to repair a broken air conditioner. Upon arrival, I found that the unit was not cooling and the compressor had tripped the breaker. I diagnosed the issue as a bad compressor and replaced the faulty part to restore cooling to the home.

I recently completed a Rheem AC tune-up and service for a client in the area. The AC unit was not cooling properly, and the client was experiencing high energy bills. During the tune-up, I checked the refrigerant levels, cleaned the condenser coils, and replaced the air filter. I also tested the electrical components and made any necessary adjustments. After the tune-up, the AC unit was running smoothly and efficiently, and the client's energy bills were significantly lower. They were very happy with the results and expressed their satisfaction with my work.

I recently completed a Bryant AC repair and tune-up for a customer in the area. The customer had been experiencing issues with their AC unit, such as poor airflow and uneven cooling. I arrived at the customer's home and performed a thorough inspection of the unit. I identified the problem as a faulty compressor, which was causing the unit to overheat and malfunction. I replaced the compressor and performed a tune-up on the unit, ensuring that it was running efficiently and effectively. The customer was very satisfied with the results, and I was able to provide them with a warranty on the repairs.

Bryant ac repair and tune up

No Cool call. Performed repair on American standard ac.

No cool service call. Performed maintenance on Rheem ac.

No cool service call. Performed repair on Trane air conditioner.

Preventative Maintenance on a Bryant with r22 for a Real estate inspection so a home owner could provide documentation when selling their home!

cost effective repair on air conditioner.

No cool on rheem ac

Heat pump repair

Tune up ac

No cool on airease ac

Service call heat pump

I performed a Trane heat pump tune up/preventative maintenance today. My customer today was interested in our annual maintenance agreement to take advantage of savings and to be included in on hvac reminders!

New HVAC install. Installed new a Rheem furnace and ac.

No cool on Goodman ac

No cool on Bryant ac