Your Best Choice for AC Heat Pump and Furnace Repair in Indianapolis, IN (6)

I am a highly skilled and experienced home service professional. I recently completed a furnace tune-up and inspection for a client in the area. The furnace was over 10 years old and had not been serviced in several years. During the tune-up, I cleaned the burners, inspected the blower, checked the thermostat, and tested the safety controls. I also replaced the air filter and lubricated the motor and blower wheels. The client was very pleased with the results and expressed relief that their furnace was now running efficiently and safely.

I am a highly skilled and experienced home service professional. I recently completed a tune-up on a Goodman gas furnace. The furnace was over years old and had not been serviced in a while. I started by removing the furnace's access panel and inspecting the components. I cleaned the burners, inspected the gas pressure regulator, and replaced the air filter. I also checked the electrical connections and tested the thermostat. After completing the tune-up, I tested the furnace to ensure it was operating correctly. I also provided the customer with a maintenance checklist to help them maintain the furnace in the future. The customer was very satisfied with the work and expressed that the furnace was running much more efficiently now.

I was called to a home to repair a Goodman furnace that was not producing heat. Upon arrival, I found that the blower motor was not working. I replaced the motor and tested the furnace to ensure it was working properly. The customer was very satisfied with the work and thanked me for my help.

I was called to replace a flame roll out on a Rheem 80% gas furnace. The furnace was not producing heat and the pilot light was not staying lit. I diagnosed the issue as a faulty flame roll out. I replaced the flame roll out and the furnace was back up and running in no time.

New HVAC install. Installed new Rheem Downflow gas furnace.

I was called to a Concord home to perform a tune-up on a 95% gas furnace. The furnace was not producing heat, and the pilot light was not staying lit. I checked the gas pressure and found that it was low. I adjusted the gas pressure and lit the pilot light. I then checked the burners and found that one was not working properly. I replaced the burner and tested the furnace. The furnace was now producing heat and the pilot light was staying lit. I also checked the air filter and found that it was dirty. I cleaned the air filter and tested the furnace again. The furnace was now producing heat and the air filter was clean. The customer was happy with the service and paid me for the tune-up.

New HVAC install. Installed new Rheem gas furnace.

I was called to inspect and tune up a heat pump system. During the inspection, I noticed a hole in the inducer motor. I informed the customer about the issue and recommended that they replace the motor. I also provided them with an estimate for the repair.

Cleaning on Payne electric heater in Indianapolis Indiana

No heat on a icp furnace

New HVAC install. Installed new Rheem air handler and heat pump.

I was called to a home to replace the igniter and high limit on a Ducane 95% gas furnace. The furnace was not producing heat, and the thermostat was not working. I diagnosed the issue as a faulty igniter and replaced it. I also replaced the high limit switch and checked the gas pressure. I also performed a tune-up on the furnace to ensure it was operating efficiently. Finally, I performed a thorough inspection of the furnace to ensure it was in good working condition.

I was called to a home to replace a high limit and igniter on a Ducane furnace. The furnace was not producing heat and the igniter was not sparking. I checked the voltage and found that the igniter was not getting power. I replaced the igniter and the furnace started working again. I also checked the high limit and found that it was not working properly. I replaced the high limit and the furnace started working again. I also checked the combustion air intake and found that it was restricted. I cleaned the intake and the furnace started working again. I also checked the blower and found that it was not working properly. I replaced the blower and the furnace started working again. I also checked the thermostat and found that it was not working properly. I replaced the thermostat and the furnace started working again. I also checked the air filter and found that it was dirty. I cleaned the air filter and the furnace started working again. I also checked the ductwork and found that it was

New HVAC install. Installed new Rheem 96% gas furnace

No heat on trane heat pump system

Installed new rheem 95% gas furnace

New HVAC install. Installed new Rheem 95% gas furnace.

I was called to a home to perform a tune-up on a 15-year-old Ducane 80% gas furnace. Upon arrival, I noticed that the furnace was not producing heat, and the flame sensor was dirty. I cleaned the flame sensor and tested the furnace, and it was working properly. I also checked the blower motor and cleaned it if necessary. I also checked the gas pressure and adjusted it if needed. I also checked the electrical connections and tightened them if necessary. Finally, I tested the furnace again to ensure that it was working properly. The customer was very happy with the service and paid me for the tune-up.

No heat on trane furnace

No heat on Duncan gas furnace

I recently completed a job as a highly skilled HVAC contractor professional. The job involved inspecting and tuning up a Goodman 95% gas furnace. The furnace was installed in a residential home and had been experiencing issues with poor heating performance. During the inspection, I identified several areas that needed attention. The air filter was dirty and needed to be replaced, and the blower motor was not working properly. I also noticed that the furnace's combustion chamber was dirty, which could be causing the poor heating performance. To address these issues, I cleaned the air filter, replaced the blower motor, and cleaned the combustion chamber. I also adjusted the thermostat settings to ensure that the furnace was operating at the correct temperature. After completing the tune-up, the homeowner noticed a significant improvement in the heating performance of the furnace. The home was now warm and comfortable, and the homeowner was very satisfied with the work that I had done.

New HVAC install. Installed new Rheem gas furnace air conditioner.

Installed new condensate pump

I was called to a home to replace a bad transformer and high limit on a 4-year-old Goodman air conditioner. I arrived at the house and found the unit outside, and after a quick inspection, I determined that the transformer was faulty. I replaced the transformer and high limit, and the unit was up and running again in no time. The customer was very happy with the service, and I was able to provide them with a warranty for the work that I performed.

Performed seasonal safety inspection on grand Aire furnace

I was dispatched to a service call for a Goodman 4-year-old furnace with a bad high-limit switch. Upon arrival, I inspected the furnace and found that the high-limit switch had failed. I replaced the switch and tested the furnace to ensure it was operating correctly. I also provided the customer with information on how to maintain the furnace and prevent future issues.

I was called to a home to perform a tune-up and inspection on a Lennox gas furnace. The furnace was over 10 years old and had not been serviced in several years. I performed a thorough inspection of the furnace, including checking the burners, ignition, and safety controls. I also cleaned the furnace and replaced the air filter. After the tune-up, the furnace was running efficiently and the homeowner was happy with the results.

Cleaning on carrier furnace

No heat on ducane furnace in Indianapolis Indiana

Cleaning on heil furnace in Indianapolis Indiana

I recently completed a 95% gas furnace tune-up and inspection for a customer in the 11230 zip code area. The furnace was a Heil unit that was over 10 years old. During the tune-up, I performed a thorough inspection of the unit, including checking the burners, ignition system, blower motor, and other components. I also cleaned the unit's air filter and replaced the air filter if necessary. I also checked the thermostat and made any necessary adjustments to ensure that the furnace was operating at peak efficiency. Finally, I provided the customer with a detailed report of the tune-up and recommendations for any future maintenance or repairs. The customer was very satisfied with the work and expressed that the furnace was running much more efficiently now.

I was called to a home to perform a tune-up on a 2008 80% 2-stage furnace. The furnace was not producing heat and was blowing cold air. I checked the furnace and found that the blower motor was not working. I replaced the blower motor and the furnace was working again.

I was called to a home in the middle of a hot summer to replace a faulty air conditioner. Upon arrival, I found that the system was not cooling the home effectively. I diagnosed the problem as a faulty compressor and replaced the part. After completing the repair, I tested the system to ensure it was running properly. The homeowner was very satisfied with the work and expressed gratitude for the quick and efficient service.

"I was dispatched to a residential property to investigate a blown transformer due to a power surge. Upon arrival, I found that the transformer had been damaged and was no longer functional. I worked with the homeowner to determine the best course of action, which included replacing the transformer and restoring power to the property. It was a challenging job, but I was able to complete it successfully.

I recently completed a Heil heat pump tune-up and inspection for a client in the area. The Heil heat pump is a popular choice for residential and commercial applications, and it was important to ensure that it was operating efficiently and effectively. During the tune-up, I performed a thorough inspection of the unit, including checking the refrigerant levels, electrical connections, and airflow. I also cleaned the coils and inspected the blower motor and fan blades for any signs of wear or damage. After the inspection, I provided the client with a detailed report outlining the findings and recommending any necessary repairs or maintenance. I also offered to schedule a follow-up appointment to ensure that the unit continues to operate smoothly throughout the heating season. Overall, the Heil heat pump tune-up and inspection was a successful and efficient process that helped the client maintain the efficiency and reliability of their heating system.

I was called to a home to perform a Rheem furnace tune-up and humidifier pad replacement. Upon arrival, I found that the furnace was not producing heat and the humidifier was not working. I inspected the furnace and found that the blower motor was not working properly, causing the furnace to not produce heat. I replaced the blower motor and the humidifier pad, and the furnace was back up and running properly. The customer was very happy with the service and thanked me for my help.

New HVAC install. Installed new Rheem 95% gas furnace.

Cleaning on two rheem gas furnaces and serviced humidifier in Carmel Indiana

I am a highly skilled and experienced home service professional. I recently completed a job for a client who needed a Trane heat pump tune-up and inspection. The heat pump was over 10 years old and had been experiencing some issues with efficiency and performance. During the tune-up, I thoroughly inspected the unit, including the compressor, evaporator coil, condenser coil, and electrical components. I cleaned the coils, checked the refrigerant levels, and tested the electrical connections. I also performed a leak test to ensure that there were no leaks in the system. After the tune-up, I provided the client with a detailed report outlining the findings and recommendations for any necessary repairs or maintenance. The client was very pleased with the results and expressed satisfaction with my work. Overall, the job was a success, and the client was happy with the results. I am proud of the work that I do and take great pride in providing my clients with high-quality service and work

I am an HVAC contractor technician, and I recently completed a job that involved repairing a Rheem furnace's flame sensor. The furnace was not producing heat, and the customer suspected that the flame sensor was the issue. To diagnose the problem, I first checked the power supply to the furnace and found that it was working correctly. Then, I removed the flame sensor from the furnace and tested it with a multimeter to ensure that it was receiving power. I found that the flame sensor was not working, so I replaced it with a new one. After replacing the flame sensor, the furnace started producing heat again, and the customer was happy with the results. I also provided the customer with some tips on how to maintain the furnace to prevent future problems. Overall, the job was successful, and the customer

I recently completed a Goodman furnace tune-up and inspection at a residential property. The furnace was over 10 years old and had been experiencing some issues with efficiency and heating. During the tune-up, I performed a thorough inspection of the unit, including checking the burners, ignition system, and safety controls. I also cleaned the burners, inspected the heat exchanger, and replaced the air filter. After the tune-up, the furnace was running more efficiently and heating the home more effectively. The homeowner was very pleased with the results and expressed satisfaction with the service.

Cleaning on rheem high efficiency gas furnace in Carmel Indiana

I was called to a home in the middle of a heat wave to repair a 2013 Ducane 92% gas furnace. The customer reported that the furnace was not producing heat, and I arrived to find the inducer motor had failed. I replaced the inducer motor and tested the furnace, and it was working properly. The customer was happy with the service and paid me for the repair.

I recently completed a tune-up on a 2021 80% Goodman gas furnace. The furnace was installed in a residential home and had been experiencing issues with poor heating performance. During the tune-up, I performed a thorough inspection of the furnace, including checking the electrical connections, gas pressure, and combustion efficiency. I also cleaned and adjusted the burners, inspected the heat exchanger, and replaced any worn or damaged parts. After the tune-up, the furnace was running smoothly and efficiently, providing the homeowner with warm and comfortable heating throughout the winter.

I recently completed a repair/tune up on a 2017 Ducane 80% gas furnace. The furnace was not producing heat properly and was blowing cold air. I diagnosed the issue as a faulty igniter and replaced it. After replacing the igniter, the furnace was able to produce heat again. I also performed a safety check on the furnace and made sure all the connections were tight and secure.