Your Best Choice for AC Heat Pump and Furnace Repair in Indianapolis, IN (3)

I recently completed a furnace tune-up for a client in the climate club. The furnace was not operating as efficiently as it should, so I performed a thorough inspection and cleaning of the unit. I replaced the air filter, checked the thermostat, and adjusted the burners to ensure optimal performance. I also checked the flue and venting system to ensure they were clear and functioning properly. Finally, I tested the furnace to ensure it was heating the home evenly and efficiently. The client was very satisfied with the results and expressed that the furnace was running much more efficiently now.

I am a highly skilled and experienced home service professional. I recently completed a Carrier furnace annual tune-up and inspection for a client in the area. The furnace was over 10 years old and had not been serviced in several years. During the tune-up, I checked the furnace's electrical connections, inspected the burners, inspected the heat exchanger, and tested the thermostat. I also cleaned the furnace's air filter and replaced the air filter if necessary. After the tune-up, I provided the client with a detailed report of my findings and recommendations. I also offered to perform any additional services that the client may need, such as replacing the air filter or cleaning the ducts. The client was very pleased with the service and said that the furnace was running much more efficiently now. They also appreciated the detailed report and the recommendations for future maintenance. Overall, it was a successful tune-up and inspection, and I am proud of the work that I did. I ta

I was called to a home to perform a furnace tune-up and inspection. The furnace was not working properly, and the homeowner was concerned about the safety of their home. I arrived at the house and performed a thorough inspection of the furnace, including checking the burners, ignition system, and safety controls. I also cleaned the furnace and replaced the air filter. After the tune-up, the furnace was working properly, and the homeowner was happy with the service.

I was called to inspect and tune a new heating system that had just been installed. The system was a high-efficiency gas furnace and air conditioner. I checked the electrical connections, gas pressure, and refrigerant levels. I also tested the thermostat and the air handler to ensure they were working properly. I made any necessary adjustments and provided the homeowner with a detailed report of my findings. The homeowner was very pleased with the work and thanked me for my expertise.

I was called to a home to perform a tune-up on a Lennox 80% gas furnace. The furnace was not producing heat as efficiently as it should, and the homeowner was experiencing cold temperatures in their home. Upon arrival, I performed a thorough inspection of the furnace and identified the issue as a dirty air filter. I removed the old air filter and replaced it with a new one, ensuring that it was properly installed and secured. Next, I checked the furnace's burners and ignition system to ensure they were working correctly. I also cleaned the blower wheel and inspected the heat exchanger for any signs of damage or corrosion. After completing the tune-up, I tested the furnace to ensure it was operating at peak efficiency. The homeowner was pleased with the results and expressed gratitude for the quick and effective service. Overall, the tune-up was a successful and efficient way to address the issue with the furnace and restore heat to the home.

I was called to inspect and tune up a Rheem heat pump system in a residential home. The system had been experiencing some issues with temperature control and efficiency. After a thorough inspection, I identified the problem as a faulty thermostat and replaced it with a new one. I also performed a tune-up on the system, including cleaning the coils, checking the refrigerant levels, and adjusting the airflow. The homeowner was very pleased with the results and expressed satisfaction with the service provided by our company.

I was called to a home to perform a tune-up on a Rheem gas furnace that was not working properly. Upon arrival, I found that the furnace was not producing heat and was blowing cold air. I checked the thermostat and found that it was set to "off." I reset the thermostat and tested the furnace again, and it started working properly. I also checked the air filter and found that it was dirty, so I replaced it with a new one. I also checked the blower motor and found that it was working properly. I tested the furnace again to ensure that it was working properly, and it was. I also provided the homeowner with tips on how to maintain their furnace and how to prevent future problems.

I was called to a home to replace the inducer motor and pressure switch on a Heil furnace. The furnace was not heating the home and the customer was concerned that the furnace was on its last legs. I arrived at the home and found that the inducer motor was not working. I replaced the inducer motor and pressure switch and the furnace was back up and running. The customer was happy to have their furnace back up and running and I was happy to have been able to help them.

I was called to a home to perform a Rheem furnace tune-up and inspection. The furnace was not working properly, and the homeowner was experiencing issues with the heat. I inspected the furnace and found that it was not producing enough heat. I replaced the air filter and cleaned the burners, which resolved the issue. I also checked the thermostat and found that it was not working properly, so I replaced it. The homeowner was very satisfied with the work I performed, and I was able to resolve the issue quickly and efficiently.

I was called to replace a gas valve on a Trane furnace. The valve was leaking and needed to be replaced to prevent any further damage. I removed the old valve and installed a new one, ensuring that it was properly connected and sealed. I also tested the furnace to ensure that it was working correctly before leaving the job site.

I was called to a home to perform a tune-up on a rheem furnace and flush the hot water. The furnace was not producing heat, and the hot water was not getting hot. I checked the furnace and found that the pilot light was out. I replaced the pilot light and tested the furnace. It was producing heat again. I also flushed the hot water tank and found that there was a lot of sediment in the tank. I cleaned the tank and refilled it with water. The hot water was now getting hot again. The customer was happy with the work I performed and paid me for the service.

I am a highly skilled HVAC contractor professional. I recently completed a Carrier furnace tune-up for a client The tune-up involved inspecting and cleaning the furnace's components, including the blower motor, heat exchanger, and combustion chamber. I also replaced the air filter and checked the thermostat settings to ensure they were accurate. The client was very pleased with the results, and I was able to provide them with a detailed report outlining the tune-up process.

I was called to replace a bad circuit board on an Amana gas furnace. The furnace was not heating the house, and the customer was concerned that the furnace was going to break down in the middle of winter. I arrived at the house and diagnosed the problem as a bad circuit board. I replaced the board and tested the furnace to ensure it was working properly. The customer was very happy with the service and thanked me for my help.

I recently completed a Trane annual tune-up for a customer in the area. This tune-up involved inspecting and servicing the heating and cooling system, including checking the electrical connections, lubricating moving parts, and cleaning the air filters. I also provided the customer with a detailed report of my findings and recommendations for any necessary repairs or maintenance. The customer was very satisfied with the service and expressed that they felt more comfortable with their heating and cooling system now.

I was called to a home in the suburbs to replace a Goodman furnace that had multiple issues. The high limit, igniter, and pressure switch were all replaced during the tune-up. The customer was very pleased with the results and thanked me for my work.

I recently completed a job at an HVAC contractor company where we repaired a Goodman furnace. The igniter pressure switch and high safety limit were the two issues we addressed. We replaced the igniter and high safety limit, and the furnace is now working properly.

I am a professional HVAC technician who works for a company called A Perfect Climate Heating & Cooling. I recently completed an annual tune-up on a 2021 Trane variable speed gas furnace. This tune-up involved inspecting and adjusting the furnace's various components to ensure optimal performance and efficiency. I also cleaned the furnace's burners, inspected the blower motor and inspected the electrical connections. After the tune-up, the furnace is now ready to provide reliable and efficient heating for the upcoming winter season.

I am a skilled professional that works for a A Perfect Climate Heating & Cooling company. I recently completed a job that involved the tune-up and drain blow out of an air handler. The air handler is a critical component of a heating and cooling system, and it plays a vital role in maintaining the comfort and efficiency of a home or business. During the tune-up, I carefully inspected the air handler for any signs of wear or damage. I replaced any worn-out parts, such as the blower motor, fan blades, and belts, and cleaned the air handler's coils and fins. I also checked the refrigerant levels and pressure to ensure that the system was operating at peak efficiency. After the tune-up, I performed a drain blow out to remove any debris or dirt that had accumulated in the air handler's drain pan. This is an important step to prevent the drain pan from overflowing and causing water damage to the home or business. The drain blow out process involves using a powerful vacuum to remove the deb

I am a skilled professional that works for a A Perfect Climate Heating & Cooling company. I recently completed a tune-up furnace inspection for a customer. The inspection involved checking the furnace's components, such as the blower, heat exchanger, and ignition system, for any signs of wear or damage. I also checked the thermostat and air filters to ensure they were clean and functioning properly. After the inspection, I provided the customer with a detailed report outlining the findings and recommending any necessary repairs or maintenance. The customer was very pleased with the service and expressed satisfaction with the results. It was a pleasure to work on this project and to help ensure that the customer's furnace was running efficiently and safely. I am grateful for the opportunity to work with such a great company and to provide excellent customer service.

I recently completed a tune-up on a 2016 Lennox 96% gas furnace. This involved cleaning the burners, inspecting the gas pressure, and adjusting the ignition. I also checked the blower motor and cleaned the air filter. The furnace is now running efficiently and providing comfortable heat for the homeowner.

I was called to perform a Payne heat pump tune-up in Avon. The customer had noticed that their system was not working as efficiently as it should be, and they wanted to ensure that it was operating at peak performance. Upon arrival, I performed a thorough inspection of the system, checking for any signs of wear or damage. I then cleaned the coils, inspected the electrical components, and tested the refrigerant levels. After the tune-up, the customer noticed a significant improvement in the efficiency of their system. They were happy to know that their heating and cooling costs would be reduced, and they were confident that their system would continue to operate smoothly for years to come. Overall, the Payne heat pump tune-up was a successful job that helped the customer save money and improve the performance of their heating and cooling system.

I am a professional HVAC technician who works for a company called A Perfect Climate Heating & Cooling. I recently completed a job in Avon, Connecticut, where I performed an annual tune-up and inspection on a Payne heat pump. The Payne heat pump was installed in the home about five years ago and had not been serviced in a while. During the tune-up, I checked the refrigerant levels, cleaned the coils, and tested the electrical components. I also inspected the ductwork for any leaks or damage. After the tune-up, I provided the homeowner with a detailed report of my findings and recommendations for any necessary repairs or maintenance. The homeowner was very pleased with the service and expressed satisfaction with the performance of the heat pump. Overall, the Payne heat pump tune-up and inspection was a successful job that helped ensure the system was running efficiently and safely. I am proud to be a part of the A Perfect Climate Heating & Cooling team and look forward to completing m

I was called to inspect a newer Heil ac unit. The unit was installed in a home in The homeowner had noticed that the unit was not cooling as well as it used to. I arrived at the home and performed a tune-up inspection on the unit. I checked the electrical connections, checked the refrigerant levels, and checked the airflow. I also checked the air filter and cleaned it if necessary. After the inspection, I provided the homeowner with a detailed report of my findings and recommendations for any necessary repairs. The homeowner was pleased with the service and decided to have the repairs completed.

I was called to a home to perform a new install, tune up, and inspection on a heating and cooling system. The homeowner had recently purchased theand wanted to ensure that the system was in good working condition before the winter season. During the inspection, I checked the system's electrical connections, inspected the air filters, and tested the thermostat to ensure that it was working properly. I also checked the ductwork for any leaks or damage and made any necessary repairs. After the inspection, I provided the homeowner with a detailed report of my findings and recommendations for any necessary repairs or maintenance. I also provided them with a quote for the repairs and maintenance work. The homeowner was very pleased with the work that I performed and decided to have the repairs and maintenance work done. I was able to schedule the work for the next day and the homeowner was able to enjoy a comfortable and warm home for the winter season.

I am a highly skilled and experienced home service professional. I recently completed a furnace repair and tune-up job for a client in the city. The furnace was over 15 years old and had been experiencing issues with efficiency and reliability. During the repair, I thoroughly inspected the furnace to identify the problem. I replaced the faulty parts and performed a tune-up to ensure that the furnace was running at peak efficiency. I also provided the client with tips on how to maintain the furnace to prevent future issues. The client was very pleased with the results of the repair and tune-up. They were impressed with my professionalism and attention to detail. I am proud of the work that I did and look forward to completing more jobs in the future.

HVAC furnace cleaning. Performed maintenance on Heil gas furnace.

New HVAC install. Installed new Rheem furnace and ac.

I performed a Rheem furnace tune up and inspection with an electronic air cleaner. I checked the furnace's electrical connections, cleaned the burners, inspected the heat exchanger, and replaced the air filter. I also checked the thermostat and made adjustments as needed.

New HVAC install. Installed new Rheem heat pump system.

I was called to a home to repair a leaking valve on a Trane heat pump. Upon arrival, I found that the valve was leaking due to a faulty seal. I replaced the seal and added r410a refrigerant to the system. After completing the repair, I tested the system to ensure it was working properly. The customer was happy with the results and thanked me for my service.

I was called to a home to perform a furnace tune-up and inspection. The furnace was 20 years old and had not been serviced in a while. I arrived at the house and began by inspecting the furnace for any obvious signs of damage or wear. I then checked the thermostat and made sure it was working properly. Next, I cleaned the furnace's burners and inspected the flue pipe for any blockages. Finally, I tested the furnace's safety controls and made sure they were working correctly. After the inspection, I provided the homeowner with a detailed report of my findings and recommendations for any necessary repairs or maintenance. The homeowner was very pleased with the service and agreed to have the repairs made.

Water leak call. Installed new Rheem 50 gallon water heater.

I replaced a fuse with a popper fuse and a new thermostat in an old maratherm system. The old thermostat was repalac ed with power on it and it blew the fuse inside. The furnace

I was called to a home to check on a heat pump that was not working properly. The customer had already called another HVAC company and they were unable to fix the issue. I arrived at the home and performed a thorough inspection of the heat pump. I found that the compressor was not working properly and needed to be replaced. I have left an estimate on replacement due to age and cost of repair. The customer was very happy with the work and thanked me for my knowledge.

Fall seasonal Tune up on old Amana furnace. Inspected the heat exchanger. Indianapolis Indiana

I was called to a home to perform a fall tuneup on a Heil furnace. Full inspection with heat exchanger scope!

I performed a fall heat inspection on a rheem heat pump system.

I was called to a home in the suburbs to perform a routine maintenance check on a new heat pump. The homeowner had recently purchased the unit and wanted to ensure it was operating properly. Upon arrival, I inspected the unit's electrical connections, inspected the refrigerant levels, and tested the unit's performance. I also checked the unit's filters and cleaned them if necessary. After completing the inspection, I provided the homeowner with a detailed report of my findings and recommendations for any necessary repairs or maintenance. The homeowner was pleased with the service and expressed satisfaction with the performance of the heat pump. I also provided the homeowner with a maintenance agreement that included regular maintenance checks and discounts on any future repairs or maintenance services. The homeowner agreed to the agreement and signed it. Overall, the job was completed successfully, and the homeowner was happy with the results.

I was called to inspect and tune up an air handler in a residential home. The unit was over 10 years old and had not been serviced in a while. I inspected the unit and found that the blower motor was not working properly. I replaced the motor and tested the unit to ensure it was working properly. I also cleaned the unit and replaced the air filter. The customer was very happy with the work and thanked me for my help.

New Rheem airhandler inspection and tune up

I recently completed a job at an HVAC contractor company where we were called to inspect and tune up a 2003 Trane air handler. The unit was located in a commercial building and had been experiencing some issues with temperature control. Upon arrival, I performed a thorough inspection of the unit, checking for any signs of damage or wear. I also tested the electrical components and the refrigerant levels to ensure they were functioning properly. After the inspection, I performed a tune-up on the unit, which involved cleaning the coils, checking the fan motor, and adjusting the thermostat. I also replaced the air filter to ensure optimal airflow. The customer was very pleased with the results of the tune-up, and we were able to resolve the temperature control issues that had been affecting their business. Overall, it was a successful job that demonstrated our commitment to providing quality HVAC services to our clients.

I recently completed an inspection and tune-up on a Rheem heat pump system. The system was installed in a residential home and had been experiencing some issues with cooling and heating. During the inspection, I checked the refrigerant levels, inspected the compressor, and cleaned the evaporator and condenser coils. I also checked the thermostat and made any necessary adjustments. After the tune-up, the system was running smoothly and efficiently. The homeowner was happy with the results and expressed satisfaction with the service. Overall, it was a successful job that helped the homeowner improve the performance of their heat pump system.

Performed Seasonal safety inspection on rheem heat pump

I was hired to perform seasonal cleaning on a Trane heat pump system. The system was installed in a residential home and had not been cleaned in several years. The cleaning process involved removing the exterior cover, cleaning the coils, and cleaning the fan motor. I also cleaned the air handler and evaporator coil. After the cleaning, the system was tested to ensure it was operating properly.

I was called to inspect and tune up a Trane air handler at a residential home. The unit was not operating properly, and the customer was experiencing issues with temperature control. Upon arrival, I performed a thorough inspection of the unit, including checking the electrical connections, refrigerant levels, and airflow. I also cleaned the coils and inspected the blower motor and fan blades for any signs of damage. After the inspection, I performed the necessary tune-up procedures to ensure the unit was operating at peak efficiency. This included adjusting the thermostat settings, lubricating the moving parts, and cleaning the air filter. The customer was pleased with the results and expressed gratitude for the prompt and professional service. I also provided them with tips on how to maintain their air handler in the future to prevent future issues. Overall, this was a successful job that helped the customer resolve their temperature control issues and maintain the efficiency of t